The CAA will issue a continuing airworthiness notice (CAN) to bring industry attention to an issue which does not necessarily meet the threshold of an ‘unsafe condition’ – which would warrant an airworthiness directive (AD). A CAN alerts, educates, recommends and guides, however compliance with the details of a CAN is not mandatory.

Latest continuing airworthiness notices

This CAN is prompted by CAA awareness of several cargo hooks in New Zealand being damaged due to torsional loads. Loads attached to a cargo hook with a spreader bar (e.g. a fertilizer bucket) may cause the cargo hook to be subjected to high torsional loads which can damage the cargo hook. To ensure continued airworthiness of the hook, additional inspections, certain on-condition repairs, and/or appropriate replacement actions have been added to the manufacturers CMM. Refer to Onboard Systems CMM 122-015-00 for the new/additional inspections required for cargo hooks used for torsional load applications.

This Continuing Airworthiness Notice (CAN) is issued to advise users of the above mentioned Garmin GTN Xi products that these units are sending erroneous ADS-B OUT data. This issue is described in Garmin Service Advisory 20140 revision B, dated 12 January 2021.

This Continuing Airworthiness Notice (CAN) is issued to advise Jabiru engine operators of the safety recommendations identified by the Australian Transport Safety Bureau (ATSB) with an investigation of a propeller loss on a Jabiru J430 aircraft in Austral

This Continuing Airworthiness Notice (CAN) is issued to advise operators and maintainers that Aeroprakt Ltd has issued Service Bulletin A32-06, dated 2 December 2019 with instructions to inspect the windscreen fitted on A-32 and A-32L (Vixxen) aircraft.

The CAN is issued to advise operators, installers and maintenance providers that certain ADS-B In equipment installations may have been installed under AC43-14, revision 5, Appendix 9, which is not considered to be Acceptable Technical Data (ATD) for ADS-